Lifting capacity
18 kN
Hook category
2
Width category
2
Speed (tpm)
1000
Spline amount (outg.as)
6
Vertical offset (mm)
110
Rotation
CCW
The Easy Float is available as an expansion to Zuidberg front linkages and offers a sliding-scale pressure relief. The module guarantees perfect ground following and reduced ground pressure from the equipment in the front linkage. The reduced ground pressure prevents wear of the equipment and saves fuel due to the lower friction. Using the Easy Float on your Zuidberg front linkage allows you to achieve better results and reduce machine costs. The Easy Float can be used on tractors with both electrical and mechanical valves.
The smart functionalities of the Easy Float:
- Sliding-scale pressure relief, can be manually adjusted outside the tractor’s cabin
- Automatic pressure monitoring with adjustment available
- Can be (de)activated from the cabin
The Accumulator and Pressure Meter is available as an expansion to Zuidberg front linkages and offers additional protection to the tractor, equipment and front linkage. The Accumulator absorbs peak loads, resulting in increased comfort levels and a prolonged service life of the tractor and equipment. In addition, the throttle developed in-house prevents the tractor’s jumpy behaviour during transport. With a combined Accumulator and Pressure Meter, a piece of equipment can be experimentally loaded or unloaded.
Smart features of the Accumulator
- Protects the tractor, equipment and front linkage against large peak loads
- Prevents jumpy road behaviour
- Optimum driving comfort
- Equipment loading and unloading possible
The three-point weight carrier is specially developed for mounting the basic weight of the tractor, which is removed when mounting the front linkage. The weight carrier is tractor-specific and, depending on the tractor type, the weight to be added to the weight carrier varies between 700 and 1600 kg.
Smart features of the Weight Carrier
- Tractor-specific design
- Weight to be added from 700 to 1600 kg
- Three-point absorption for the tractor’s basic weight
The front control system has been developed based on the experience that it may be desirable to operate the front linkage outside the cabin, e.g. while hooking up and disconnecting equipment. These front control systems have a tractor-specific design and come with various features. It is therefore important to always ask your dealer about the possibilities for your tractor.
Front control systems in various versions and sizes:
The position limiter set is available as an expansion to Zuidberg front linkages and offers an adjustable height or depth limiter, depending on the mounting method of the valve on the multi-valve. Use of the position limiter set results in increased ease of working and eliminates the adverse impact of unacceptably high or low positions of the front linkage.
Smart features of the position limiter set:
The DIN plate and connection set is available as an expansion to Zuidberg front linkages and offers rapid adjustment of a front linkage to a short mounted DIN plate. The short mounting directly to the lifting frame provides increased stability and a solid construction. In addition, the space for the PTO maintains the option to drive equipment and, due to its use in the front linkage, a lifting mechanism on the equipment itself is no longer required. The Zuidberg DIN plate is constructed in accordance with the French standard and DIN standard, and fits almost all Zuidberg front linkages that have a cast-iron lifting frame.
Various versions are available:
- Communal plate, French standard
- Communal plate, Scandinavian
- Communal plate, CAT A/B/F1/F2
- Communal plate, CAT F2
- Connection set for front linkages of 13 to 50 kN
The 7-pole connector is available as an expansion to Zuidberg front linkages and offers the possibility to electrically connect the tractor and equipment. The set is supplied complete for mounting to the front of the front linkage. It can be installed in various ways and locations, however, most Zuidberg front linkages are predesigned for this to simplify the installation.
Among other things, the 7-pole connector can supply electricity to:
- Lighting
- Indicators
- Number plate holder
- Electrical components on equipment
- Sensors for precision farming purposes
The chain hook set is available as an expansion to Zuidberg front linkages and holds chains or springs that are used to reduce the load on front equipment. The chain hooks offer various options for attaching the chains or springs and are mounted at the right height and width to optimise the load reduction on the equipment.
The chain hook set may include the following smart features:
- Design matching the tractor, bonnet or front linkage
- Easy access of lubrication points is maintained
- Uninterrupted beams of the headlights are retained
- Extra high chain hooks for tractors that are frequently used on hilly terrain
The tractor "A-frame" is available as an expansion to Zuidberg front linkages and serves as a quick-coupling system for quickly and easily hooking up equipment. The number of steps to be completed is drastically reduced, shortening the time required for hooking up the equipment and leaving more time for other tasks. The tractor "A-frame", which has a maximum permissible weight of 1400 kg, is highly recommended for equipment that needs to be frequently hooked up and disconnected.
The front hydraulic system is available as an expansion to Zuidberg front linkages and offers the possibility to hydraulically operate equipment. A Zuidberg front linkage is often predesigned for mounting one or more front hydraulics sets for optimum integration in the top plate.
Customised front hydraulics:
- Hydraulic hoses at the correct length
- Banjo eye and nipple connection for easy mounting
- Quick release with dust cover
- Supplied ready for use
Some tractors can also be equipped with a front control system, with the option to control the front hydraulics outside the cabin. It is therefore important to always ask your dealer about the possibilities for your tractor.
The Lowering Speed Control Set is available as an expansion to Zuidberg front linkages and offers the possibility to adjust the lowering speed of the front linkage as desired. The set has been designed to be connected directly to the multi-valve, but can also be used with a 12 mm pipe connection. If the multi-valve is in the single operating position, the oil flow can be adjusted as desired using the blue button, also changing the lowering speed of the front linkage.
Lowering Speed Control Set, the power of simplicity:
The Override Protection improves both visibility and recognizability of the tractor and can limit the damage when involved in a crash. Everyone of us can play a part in improving (agricultural) traffic safety and reducing the number of road accidents. Not only by driving more carefully ourselves, but also by making our machines and vehicles less dangerous. Every single person that falls victim to a road traffic accident is one too many, and improving public perception of agricultural traffic is something that everyone of us would like to do.
- Width: 2150 tot 3000 mm
- Weight: 310 kg
- Can be coupled with both the usual 3-point front linkage, and with any quick realease A-frame
- Adjustable side deflectors and over-centre reversing protection
- Built-in towbar as standard
- Legally required width reflective markings
- Personalize with your logo (supplied)
- Colour: black (other colors available on request)
Options
- LED-marker lights
- Can be extended with a storage space/toolbox for hand tools and chainsaw support
- Bumper pillars
- Support legs (for coupling using A-frame)
Override protection Multifunctional
The Override Protection improves both visibility and recognizability of the tractor and can limit the damage when involved in a crash. Everyone of us can play a part in improving (agricultural) traffic safety and reducing the number of road accidents. Not only by driving more carefully ourselves, but also by making our machines and vehicles less dangerous. Every single person that falls victim to a road traffic accident is one too many, and improving public perception of agricultural traffic is something that everyone of us would like to do.
- Width: 2150 to 3000 mm
- Weight 1000: 985 kg. (incl. 850 kg. basic weight)
- Weight 1600: 1540 kg. (incl. 1400 kg. basic weight)
- Adjustable side deflectors and over-centre reversing protection
- Built-in towbar as standard
- Legally required width reflective markings
- Personalize with your logo (supplied)
- Colour: black (other colors available on request)
Options
- LED-marker lights
- Bumper pillars
A competitively priced 800 kg concrete weight of excellent quality. The modern design ensures that the tractor’s lighting is obstructed as little as possible. The weight can also be moved easily using the recesses for the forks of a forklift truck.
Lifting capacity
Hook category
Width category
18 kN
2
2
Speed (tpm)
Spline amount (outg.as)
Vertical offset (mm)
Rotation
1000
6
110
CCW